Author: VITO FAQ

Yes, you can use one VITO Bridge for multiple VITO FT CONNECT testers. Just make sure to send the data from one device at a time, not all at once.

The VITO Bridge is required to make the VITO FT CONNECT compatible with the VITOconnect platform. It enables seamless data transfer and visualization on the web, allowing you to easily receive detailed reports via email.

If you take a measurement in the wrong fryer, for example, you can discard it by pressing the up arrow instead of saving it. However, once the measurement is saved, it cannot be deleted directly from the tester. To remove a measurement, you can do so in the HACCP list on the VITOconnect platform. Please note that editing measurements is not possible.

12 months for the VITOconnect Bridge and 24 months for the VITO FT CONNECT tester.

The measurement result does not change after filtration, as the oil quality cannot be reversed or recycled. However, with daily filtration using VITO, the oil stays in the green and yellow zones for much longer, delaying the need for an oil change. Remember, for accurate measurement results, you must wait at least 20 minutes after frying or filtering the oil before measuring its quality.

We recommend calibration every 12 months.

The measurement results may vary by up to 2% TPM

VITO saves small businesses money by reducing oil costs and improving food consistency.

VITO filters at frying temperature, so there’s no need to reheat the oil.

Yes, VITO is compatible with both gas and electric fryers.